Outdoor wood shutters in a grooved panel design integrate a solid flat composite section with vertical grooves bordered by the stiles and rails. This unique style is a cross between raised panel and board and batten shutters. Our premium wood selection includes solid kiln dried California Redwood and Western Red Cedar. While sizes are not “custom”, both the width and height are available in quarter inch increments.
Width: 10 – 32″ in 1/4″ increments
Height: 15 – 108″ in 1/4″ increments
Composite Groove Panels
Extira™ exterior grade MDF
Side Stiles: 1-1/2″ thick x 2-1/8″ wide
Top Rail: 1-1/2″ thick x 3″ height
Bottom Rail: 1-1/2″ thick x 3″ height
Divider Rail (optional): 1-1/2″ thick x 3″ height
Joints: glued and doweled with a threaded screw
Printable Specification PDF:
Exterior wooden shutters can be installed to be functional (swing open and closed), but most often are stationary. Non-functional exterior shutters require less precise measurements than those that operate.
Measure each window width from the outside edge of window trim to the same spot on the opposite side. Calculate the shutter panel width, starting with the smallest window. Window widths narrower than 60 inches can appear to have functional outside shutters by ordering panels half of the window width. Windows larger than 60 inches, while unable to appear functional, should use panel sizes between 30% and 50% of the window width. Consider panel widths of narrow windows when determining panel widths for larger windows. Do not exceed a house shutter width greater than 50% of the window.
Measure each window width from the top edge of the window trim to the bottom edge of the window trim. If there is a sill at the bottom of the window, measure to the top of the sill. Install the shutters about 1/4 inch above the sill. Exterior wood shutters are sold in 1/4 inch increments to best fit the window.
A divider rail on premium wood grooved panel shutters can be located at a standard or custom location. To specify a custom location, provide the measurement from the bottom of the shutter to the center of the divider.
See measuring instructions for functional shutters in greater overall detail.
ShutterLand premium wood groove panel outdoor wood shutters require approximately 4 weeks to manufacture. Production times may be shorter or longer depending on the number of orders in house, holidays, size of order, finishing, or a number of other considerations. We do not guarantee production or shipping times.
We have streamlined the production process to reduce delays. We do not rush orders, cut corners, or sacrifice quality.
We ship all groove panel outdoor wood shutters from our manufacturing facility in Alabama.
We generally ship using FedEx Ground, usually resulting in a shipping period under one week.
See more about ShutterLand’s production and shipping methods.