Your one stop exterior shutter shop.

Combo Exterior Wooden Shutters

Get the best of two popular styles with combination exterior wooden shutters. Wooden 1 1/2 inch louvers are fixed at a 17 degree angle with a composite raised panel at the bottom separated by a divider rail. ShutterLand premium wood shutters are constructed from solid kiln dried California Redwood or Western Red Cedar. While sizes are not “custom,” both the width and height are available in quarter inch increments.

Price & Order

Item Summary

  • Shutter Panel
  • Panels
  • Total Price

Panel Sizes
Width: 10 – 32″ in 1/4″ increments
Height: 15 – 108″ in 1/4″ increments

Solid Premium Wood Stiles & Rails
California Redwood
Western Red Cedar

Composite Raised Panels
Extira™ exterior grade MDF

Fixed Louvers: 1-1/2″ wide x 1/4″ thick
Side Stiles: 1-1/2″ thick x 2″ wide
Top Rail: 1-1/2″ thick x 3″ height
Bottom Rail: 1-1/2″ thick x 3 to 4-1/2″ height
Divider Rail (required): 1-1/2″ thick x 3″ height
Joints: glued and doweled with a threaded screw

Primed only
Painted – 9 standard colors
Custom painted – Benjamin Moore & Sherwin Williams colors (one time $100 charge)

Printable Specification PDF: 

PDF Spec Sheet

Exterior Wooden Shutters

Exterior shutters can be installed to be functional (swing open and closed), but most often are stationary. Non-functional exterior wooden shutters require less precise measurements than those that operate.

Width for Non-Functional Wooden Shutters

Measure each window width from the outside edge of window trim to the same spot on the opposite side. Calculate the shutter panel width, starting with the smallest window. Window widths narrower than 60 inches can appear to have functional outside shutters by ordering panels half of the window width. Windows larger than 60 inches, while unable to appear functional, should use panel sizes between 30% and 50% of the window width. Consider panel widths of narrow windows when determining panel widths for larger windows. Do not exceed a house shutter width greater than 50% of the window.

Height for Non-Functional Exterior Shutters

Measure each window width from the top edge of the window trim to the bottom edge of the window trim. If there is a sill at the bottom of the window, measure to the top of the sill. Install the shutters about 1/4 inch above the sill. Exterior wood shutters are sold in 1/4 inch increments to best fit the window.

Divider Rail

Measure for an exterior shutter divider rail.A divider rail on premium wood combination panel shutters can be located at a standard or custom location. To specify a custom location, provide the measurement from the bottom of the shutter to the center of the divider.

See measuring instructions for functional exterior wooden shutters in greater overall detail.

ShutterLand premium combination exterior wooden shutters require approximately 4 weeks to manufacture. Production times may be shorter or longer depending on the number of orders in house, holidays, size of order, finishing, or a number of other considerations. We do not guarantee production or shipping times.

We have streamlined the production process to reduce delays. We do not rush orders, cut corners, or sacrifice quality.

We ship all combination exterior wood shutters from our manufacturing facility in Alabama.

We generally ship using FedEx Ground, usually resulting in a shipping period under one week.

See more about manufacturing and exterior shutter shipping.


Bruce G.

I was amazed at the quality of your window shutters. It was far superior to any other house shutter material I have purchased. Excellent quality material and a smooth finished exterior product.

Gordon S.

I would use this source again for outdoor shutters and would also recommend it to others. The price, quality and service were excellent.